Skip navigation links

Additional languages
5.1.5 Using System Variables »
Section Navigation      [Toggle]

5.1.4. Session System Variables

Several system variables exist only as session variables. These cannot be set at server startup but can be assigned values at runtime using the SET statement (except for those that are read only). Most of them are not displayed by SHOW VARIABLES, but you can obtain their values using SELECT. This section describes the session system variables. For information about setting or displaying their values, see Section 5.1.5, “Using System Variables”. For example: 

mysql> SELECT @@AUTOCOMMIT;
+--------------+
| @@AUTOCOMMIT |
+--------------+
|            1 |
+--------------+

The lettercase of these variables does not matter.

The following table lists the system variables that have only session scope:

Name Cmd-Line Option file System Var Dynamic
autocommit     Yes Yes
big-tables Yes Yes    
- Variable: big_tables     Yes Yes
error_count     Yes No
foreign_key_checks     Yes Yes
identity     Yes Yes
insert_id     Yes Yes
last_insert_id     Yes Yes
ndb_table_no_logging     Yes Yes
ndb_table_temporary     Yes Yes
sql_auto_is_null     Yes Yes
sql_big_selects     Yes Yes
sql_big_tables     Yes Yes
sql_buffer_result     Yes Yes
sql_log_bin     Yes Yes
sql_log_off     Yes Yes
sql_log_update     Yes Yes
sql_notes     Yes Yes
sql_quote_show_create     Yes Yes
sql_safe_updates     Yes Yes
sql_warnings     Yes Yes
timestamp     Yes Yes
transaction_allow_batching     Yes Yes
unique_checks     Yes Yes
warning_count     Yes No

  • AUTOCOMMIT = {0 | 1}

    Set the autocommit mode. If set to 1, all changes to a table take effect immediately. If set to 0 you have to use COMMIT to accept a transaction or ROLLBACK to cancel it. By default, client connections begin with AUTOCOMMIT set to 1. If you change AUTOCOMMIT mode from 0 to 1, MySQL performs an automatic COMMIT of any open transaction. Another way to begin a transaction is to use a START TRANSACTION or BEGIN statement. See Section 12.4.1, “START TRANSACTION, COMMIT, and ROLLBACK Syntax”.

  • BIG_TABLES = {0 | 1}

    If set to 1, all temporary tables are stored on disk rather than in memory. This is a little slower, but the error The table tbl_name is full does not occur for SELECT operations that require a large temporary table. The default value for a new connection is 0 (use in-memory temporary tables). Normally, you should never need to set this variable, because in-memory tables are automatically converted to disk-based tables as required.

    Note

    This variable was formerly named SQL_BIG_TABLES.

  • ERROR_COUNT

    The number of errors that resulted from the last statement that generated messages. This variable is read only. See Section 12.5.5.15, “SHOW ERRORS Syntax”.

  • FOREIGN_KEY_CHECKS = {0 | 1}

    If set to 1 (the default), foreign key constraints for InnoDB tables are checked. If set to 0, they are ignored. Disabling foreign key checking can be useful for reloading InnoDB tables in an order different from that required by their parent/child relationships. See Section 13.5.6.4, “FOREIGN KEY Constraints”.

    Setting FOREIGN_KEY_CHECKS to 0 also affects data definition statements: DROP SCHEMA drops a schema even if it contains tables that have foreign keys that are referred to by tables outside the schema, and DROP TABLE drops tables that have foreign keys that are referred to by other tables.

    Note

    Setting FOREIGN_KEY_CHECKS to 1 does not trigger a scan of the existing table data. Therefore, rows added to the table while FOREIGN_KEY_CHECKS=0 will not be verified for consistency.

  • IDENTITY = value

    This variable is a synonym for the LAST_INSERT_ID variable. It exists for compatibility with other database systems. You can read its value with SELECT @@IDENTITY, and set it using SET IDENTITY.

  • INSERT_ID = value

    Set the value to be used by the following INSERT or ALTER TABLE statement when inserting an AUTO_INCREMENT value. This is mainly used with the binary log.

  • LAST_INSERT_ID = value

    Set the value to be returned from LAST_INSERT_ID(). This is stored in the binary log when you use LAST_INSERT_ID() in a statement that updates a table. Setting this variable does not update the value returned by the mysql_insert_id() C API function.

  • SQL_AUTO_IS_NULL = {0 | 1}

    If set to 1 (the default), you can find the last inserted row for a table that contains an AUTO_INCREMENT column by using the following construct: 

    WHERE auto_increment_column IS NULL

    This behavior is used by some ODBC programs, such as Access.

  • SQL_BIG_SELECTS = {0 | 1}

    If set to 0, MySQL aborts SELECT statements that are likely to take a very long time to execute (that is, statements for which the optimizer estimates that the number of examined rows exceeds the value of max_join_size). This is useful when an inadvisable WHERE statement has been issued. The default value for a new connection is 1, which allows all SELECT statements.

    If you set the max_join_size system variable to a value other than DEFAULT, SQL_BIG_SELECTS is set to 0.

  • SQL_BUFFER_RESULT = {0 | 1}

    If set to 1, SQL_BUFFER_RESULT forces results from SELECT statements to be put into temporary tables. This helps MySQL free the table locks early and can be beneficial in cases where it takes a long time to send results to the client. The default value is 0.

  • SQL_LOG_BIN = {0 | 1}

    If set to 0, no logging is done to the binary log for the client. The client must have the SUPER privilege to set this option. The default value is 1.

  • SQL_LOG_OFF = {0 | 1}

    If set to 1, no logging is done to the general query log for this client. The client must have the SUPER privilege to set this option. The default value is 0.

  • SQL_LOG_UPDATE = {0 | 1}

    This variable is deprecated, and is mapped to SQL_LOG_BIN.

  • SQL_NOTES = {0 | 1}

    If set to 1 (the default), warnings of Note level are recorded. If set to 0, Note warnings are suppressed. mysqldump includes output to set this variable to 0 so that reloading the dump file does not produce warnings for events that do not affect the integrity of the reload operation.

  • SQL_QUOTE_SHOW_CREATE = {0 | 1}

    If set to 1 (the default), the server quotes identifiers for SHOW CREATE TABLE and SHOW CREATE DATABASE statements. If set to 0, quoting is disabled. This option is enabled by default so that replication works for identifiers that require quoting. See Section 12.5.5.9, “SHOW CREATE TABLE Syntax”, and Section 12.5.5.6, “SHOW CREATE DATABASE Syntax”.

  • SQL_SAFE_UPDATES = {0 | 1}

    If set to 1, MySQL aborts UPDATE or DELETE statements that do not use a key in the WHERE clause or a LIMIT clause. This makes it possible to catch UPDATE or DELETE statements where keys are not used properly and that would probably change or delete a large number of rows. The default value is 0.

  • SQL_SELECT_LIMIT = {value | DEFAULT}

    The maximum number of rows to return from SELECT statements. The default value for a new connection is the maximum number of rows that the server allows per table, which depends on the server configuration and may be affected if the server build was configured with --with-big-tables. Typical default values are (232)–1 or (264)–1. If you have changed the limit, the default value can be restored by assigning a value of DEFAULT.

    If a SELECT has a LIMIT clause, the LIMIT takes precedence over the value of SQL_SELECT_LIMIT.

    SQL_SELECT_LIMIT does not apply to SELECT statements executed within stored routines. It also does not apply to SELECT statements that do not produce a result set to be returned to the client. These include SELECT statements in subqueries, CREATE TABLE ... SELECT, and INSERT INTO ... SELECT.

  • SQL_WARNINGS = {0 | 1}

    This variable controls whether single-row INSERT statements produce an information string if warnings occur. The default is 0. Set the value to 1 to produce an information string.

  • TIMESTAMP = {timestamp_value | DEFAULT}

    Set the time for this client. This is used to get the original timestamp if you use the binary log to restore rows. timestamp_value should be a Unix epoch timestamp, not a MySQL timestamp.

    SET TIMESTAMP affects the value returned by NOW() but not by SYSDATE(). This means that timestamp settings in the binary log have no effect on invocations of SYSDATE(). The server can be started with the --sysdate-is-now option to cause SYSDATE() to be an alias for NOW(), in which case SET TIMESTAMP affects both functions.

  • UNIQUE_CHECKS = {0 | 1}

    If set to 1 (the default), uniqueness checks for secondary indexes in InnoDB tables are performed. If set to 0, storage engines are allowed to assume that duplicate keys are not present in input data. If you know for certain that your data does not contain uniqueness violations, you can set this to 0 to speed up large table imports to InnoDB.

    Note that setting this variable to 0 does not require storage engines to ignore duplicate keys. An engine is still allowed to check for them and issue duplicate-key errors if it detects them.

  • WARNING_COUNT

    The number of errors, warnings, and notes that resulted from the last statement that generated messages. This variable is read only. See Section 12.5.5.32, “SHOW WARNINGS Syntax”.