Skip navigation links

Additional languages
12.1.5.1 Silent Column Specification Changes »
Section Navigation      [Toggle]

12.1.5. CREATE TABLE Syntax

[+/-]

12.1.5.1. Silent Column Specification Changes
CREATE [TEMPORARY] TABLE [IF NOT EXISTS] tbl_name
    (create_definition,...)
    [table_option] ...

Or: 

CREATE [TEMPORARY] TABLE [IF NOT EXISTS] tbl_name
    [(create_definition,...)]
    [table_option] ...
    select_statement

Or: 

CREATE [TEMPORARY] TABLE [IF NOT EXISTS] tbl_name
    { LIKE old_tbl_name | (LIKE old_tbl_name) }

create_definition:
    col_name column_definition
  | [CONSTRAINT [symbol]] PRIMARY KEY [index_type] (index_col_name,...)
        [index_type]
  | {INDEX|KEY} [index_name] [index_type] (index_col_name,...)
        [index_type]
  | [CONSTRAINT [symbol]] UNIQUE [INDEX|KEY]
        [index_name] [index_type] (index_col_name,...)
        [index_type]
  | {FULLTEXT|SPATIAL} [INDEX|KEY] [index_name] (index_col_name,...)
        [index_type]
  | [CONSTRAINT [symbol]] FOREIGN KEY
        [index_name] (index_col_name,...) reference_definition
  | CHECK (expr)

column_definition:
    data_type [NOT NULL | NULL] [DEFAULT default_value]
      [AUTO_INCREMENT] [UNIQUE [KEY] | [PRIMARY] KEY]
      [COMMENT 'string'] [reference_definition]

data_type:
    BIT[(length)]
  | TINYINT[(length)] [UNSIGNED] [ZEROFILL]
  | SMALLINT[(length)] [UNSIGNED] [ZEROFILL]
  | MEDIUMINT[(length)] [UNSIGNED] [ZEROFILL]
  | INT[(length)] [UNSIGNED] [ZEROFILL]
  | INTEGER[(length)] [UNSIGNED] [ZEROFILL]
  | BIGINT[(length)] [UNSIGNED] [ZEROFILL]
  | REAL[(length,decimals)] [UNSIGNED] [ZEROFILL]
  | DOUBLE[(length,decimals)] [UNSIGNED] [ZEROFILL]
  | FLOAT[(length,decimals)] [UNSIGNED] [ZEROFILL]
  | DECIMAL[(length[,decimals])] [UNSIGNED] [ZEROFILL]
  | NUMERIC[(length[,decimals])] [UNSIGNED] [ZEROFILL]
  | DATE
  | TIME
  | TIMESTAMP
  | DATETIME
  | YEAR
  | CHAR[(length)]
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | VARCHAR(length)
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | BINARY[(length)]
  | VARBINARY(length)
  | TINYBLOB
  | BLOB
  | MEDIUMBLOB
  | LONGBLOB
  | TINYTEXT [BINARY]
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | TEXT [BINARY]
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | MEDIUMTEXT [BINARY]
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | LONGTEXT [BINARY]
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | ENUM(value1,value2,value3,...)
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | SET(value1,value2,value3,...)
      [CHARACTER SET charset_name] [COLLATE collation_name]
  | spatial_type

index_col_name:
    col_name [(length)] [ASC | DESC]

index_type:
    USING {BTREE | HASH | RTREE}

reference_definition:
    REFERENCES tbl_name [(index_col_name,...)]
      [MATCH FULL | MATCH PARTIAL | MATCH SIMPLE]
      [ON DELETE reference_option]
      [ON UPDATE reference_option]

reference_option:
    RESTRICT | CASCADE | SET NULL | NO ACTION

table_option:
    {ENGINE|TYPE} [=] engine_name
  | AUTO_INCREMENT [=] value
  | AVG_ROW_LENGTH [=] value
  | [DEFAULT] CHARACTER SET [=] charset_name
  | CHECKSUM [=] {0 | 1}
  | [DEFAULT] COLLATE [=] collation_name
  | COMMENT [=] 'string'
  | CONNECTION [=] 'connect_string'
  | DATA DIRECTORY [=] 'absolute path to directory'
  | DELAY_KEY_WRITE [=] {0 | 1}
  | INDEX DIRECTORY [=] 'absolute path to directory'
  | INSERT_METHOD [=] { NO | FIRST | LAST }
  | MAX_ROWS [=] value
  | MIN_ROWS [=] value
  | PACK_KEYS [=] {0 | 1 | DEFAULT}
  | PASSWORD [=] 'string'
  | ROW_FORMAT [=] {DEFAULT|DYNAMIC|FIXED|COMPRESSED|REDUNDANT|COMPACT}
  | UNION [=] (tbl_name[,tbl_name]...)

select_statement:
    [IGNORE | REPLACE] [AS] SELECT ...   (Some legal select statement)

CREATE TABLE creates a table with the given name. You must have the CREATE privilege for the table.

Rules for allowable table names are given in Section 8.2, “Schema Object Names”. By default, the table is created in the default database. An error occurs if the table exists, if there is no default database, or if the database does not exist.

The table name can be specified as db_name.tbl_name to create the table in a specific database. This works regardless of whether there is a default database, assuming that the database exists. If you use quoted identifiers, quote the database and table names separately. For example, write `mydb`.`mytbl`, not `mydb.mytbl`.

You can use the TEMPORARY keyword when creating a table. A TEMPORARY table is visible only to the current connection, and is dropped automatically when the connection is closed. This means that two different connections can use the same temporary table name without conflicting with each other or with an existing non-TEMPORARY table of the same name. (The existing table is hidden until the temporary table is dropped.) To create temporary tables, you must have the CREATE TEMPORARY TABLES privilege.

Note

CREATE TABLE does not automatically commit the current active transaction if you use the TEMPORARY keyword.

The keywords IF NOT EXISTS prevent an error from occurring if the table exists. However, there is no verification that the existing table has a structure identical to that indicated by the CREATE TABLE statement.

Note

If you use IF NOT EXISTS in a CREATE TABLE ... SELECT statement, any rows selected by the SELECT part are inserted regardless of whether the table already exists.

MySQL represents each table by an .frm table format (definition) file in the database directory. The storage engine for the table might create other files as well. In the case of MyISAM tables, the storage engine creates data and index files. Thus, for each MyISAM table tbl_name, there are three disk files:

File Purpose
tbl_name.frm Table format (definition) file
tbl_name.MYD Data file
tbl_name.MYI Index file

Chapter 13, Storage Engines, describes what files each storage engine creates to represent tables.

data_type represents the data type in a column definition. spatial_type represents a spatial data type. The data type syntax shown is representative only. For a full description of the syntax available for specifying column data types, as well as information about the properties of each type, see Chapter 10, Data Types, and Chapter 20, Spatial Extensions.

Some attributes do not apply to all data types. AUTO_INCREMENT applies only to integer and floating-point types. DEFAULT does not apply to the BLOB or TEXT types.

  • If neither NULL nor NOT NULL is specified, the column is treated as though NULL had been specified.

  • An integer or floating-point column can have the additional attribute AUTO_INCREMENT. When you insert a value of NULL (recommended) or 0 into an indexed AUTO_INCREMENT column, the column is set to the next sequence value. Typically this is value+1, where value is the largest value for the column currently in the table. AUTO_INCREMENT sequences begin with 1.

    To retrieve an AUTO_INCREMENT value after inserting a row, use the LAST_INSERT_ID() SQL function or the mysql_insert_id() C API function. See Section 11.10.3, “Information Functions”, and Section 26.2.3.37, “mysql_insert_id()”.

    If the NO_AUTO_VALUE_ON_ZERO SQL mode is enabled, you can store 0 in AUTO_INCREMENT columns as 0 without generating a new sequence value. See Section 5.1.7, “SQL Modes”.

    Note

    There can be only one AUTO_INCREMENT column per table, it must be indexed, and it cannot have a DEFAULT value. An AUTO_INCREMENT column works properly only if it contains only positive values. Inserting a negative number is regarded as inserting a very large positive number. This is done to avoid precision problems when numbers “wrap” over from positive to negative and also to ensure that you do not accidentally get an AUTO_INCREMENT column that contains 0.

    For MyISAM and BDB tables, you can specify an AUTO_INCREMENT secondary column in a multiple-column key. See Section 3.6.9, “Using AUTO_INCREMENT”.

    To make MySQL compatible with some ODBC applications, you can find the AUTO_INCREMENT value for the last inserted row with the following query: 

    SELECT * FROM tbl_name WHERE auto_col IS NULL

    For information about InnoDB and AUTO_INCREMENT, see Section 13.2.6.3, “How AUTO_INCREMENT Handling Works in InnoDB”.

  • Character data types (CHAR, VARCHAR, TEXT) can include CHARACTER SET and COLLATE attributes to specify the character set and collation for the column. For details, see Section 9.1, “Character Set Support”. CHARSET is a synonym for CHARACTER SET. Example: 

    CREATE TABLE t (c CHAR(20) CHARACTER SET utf8 COLLATE utf8_bin);

    MySQL 5.0 interprets length specifications in character column definitions in characters. (Versions before MySQL 4.1 interpreted them in bytes.) Lengths for BINARY and VARBINARY are in bytes.

  • The DEFAULT clause specifies a default value for a column. With one exception, the default value must be a constant; it cannot be a function or an expression. This means, for example, that you cannot set the default for a date column to be the value of a function such as NOW() or CURRENT_DATE. The exception is that you can specify CURRENT_TIMESTAMP as the default for a TIMESTAMP column. See Section 10.3.1.1, “TIMESTAMP Properties”.

    If a column definition includes no explicit DEFAULT value, MySQL determines the default value as described in Section 10.1.4, “Data Type Default Values”.

    BLOB and TEXT columns cannot be assigned a default value.

    CREATE TABLE fails if a date-valued default is not correct according to the NO_ZERO_IN_DATE SQL mode, even if strict SQL mode is not enabled. For example, c1 DATE DEFAULT '2010-00-00' causes CREATE TABLE to fail with Invalid default value for 'c1'.

  • A comment for a column can be specified with the COMMENT option, up to 255 characters long. The comment is displayed by the SHOW CREATE TABLE and SHOW FULL COLUMNS statements.

  • KEY is normally a synonym for INDEX. The key attribute PRIMARY KEY can also be specified as just KEY when given in a column definition. This was implemented for compatibility with other database systems.

  • A UNIQUE index creates a constraint such that all values in the index must be distinct. An error occurs if you try to add a new row with a key value that matches an existing row. This constraint does not apply to NULL values except for the BDB storage engine. For other engines, a UNIQUE index allows multiple NULL values for columns that can contain NULL.

  • A PRIMARY KEY is a unique index where all key columns must be defined as NOT NULL. If they are not explicitly declared as NOT NULL, MySQL declares them so implicitly (and silently). A table can have only one PRIMARY KEY. If you do not have a PRIMARY KEY and an application asks for the PRIMARY KEY in your tables, MySQL returns the first UNIQUE index that has no NULL columns as the PRIMARY KEY.

    In InnoDB tables, having a long PRIMARY KEY wastes a lot of space. (See Section 13.2.13, “InnoDB Table and Index Structures”.)

  • In the created table, a PRIMARY KEY is placed first, followed by all UNIQUE indexes, and then the non-unique indexes. This helps the MySQL optimizer to prioritize which index to use and also more quickly to detect duplicated UNIQUE keys.

  • A PRIMARY KEY can be a multiple-column index. However, you cannot create a multiple-column index using the PRIMARY KEY key attribute in a column specification. Doing so only marks that single column as primary. You must use a separate PRIMARY KEY(index_col_name, ...) clause.

  • If a PRIMARY KEY or UNIQUE index consists of only one column that has an integer type, you can also refer to the column as _rowid in SELECT statements.

  • In MySQL, the name of a PRIMARY KEY is PRIMARY. For other indexes, if you do not assign a name, the index is assigned the same name as the first indexed column, with an optional suffix (_2, _3, ...) to make it unique. You can see index names for a table using SHOW INDEX FROM tbl_name. See Section 12.5.4.13, “SHOW INDEX Syntax”.

  • Some storage engines allow you to specify an index type when creating an index. The syntax for the index_type specifier is USING type_name.

    Example: 

    CREATE TABLE lookup
  (id INT, INDEX USING BTREE (id))
  ENGINE = MEMORY;

    For details about USING, see Section 12.1.4, “CREATE INDEX Syntax”.

    For more information about indexes, see Section 7.4.5, “How MySQL Uses Indexes”.

  • In MySQL 5.0, only the MyISAM, InnoDB, BDB, and MEMORY storage engines support indexes on columns that can have NULL values. In other cases, you must declare indexed columns as NOT NULL or an error results.

  • For CHAR, VARCHAR, BINARY, and VARBINARY columns, indexes can be created that use only the leading part of column values, using col_name(length) syntax to specify an index prefix length. BLOB and TEXT columns also can be indexed, but a prefix length must be given. Prefix lengths are given in characters for non-binary string types and in bytes for binary string types. That is, index entries consist of the first length characters of each column value for CHAR, VARCHAR, and TEXT columns, and the first length bytes of each column value for BINARY, VARBINARY, and BLOB columns. Indexing only a prefix of column values like this can make the index file much smaller. See Section 7.4.3, “Column Indexes”.

    Only the MyISAM, BDB, and InnoDB storage engines support indexing on BLOB and TEXT columns. For example: 

    CREATE TABLE test (blob_col BLOB, INDEX(blob_col(10)));

    Prefixes can be up to 1000 bytes long (767 bytes for InnoDB tables). Note that prefix limits are measured in bytes, whereas the prefix length in CREATE TABLE statements is interpreted as number of characters for non-binary data types (CHAR, VARCHAR, TEXT). Take this into account when specifying a prefix length for a column that uses a multi-byte character set.

  • An index_col_name specification can end with ASC or DESC. These keywords are allowed for future extensions for specifying ascending or descending index value storage. Currently, they are parsed but ignored; index values are always stored in ascending order.

  • When you use ORDER BY or GROUP BY on a TEXT or BLOB column in a SELECT, the server sorts values using only the initial number of bytes indicated by the max_sort_length system variable. See Section 10.4.3, “The BLOB and TEXT Types”.

  • You can create special FULLTEXT indexes, which are used for full-text searches. Only the MyISAM storage engine supports FULLTEXT indexes. They can be created only from CHAR, VARCHAR, and TEXT columns. Indexing always happens over the entire column; column prefix indexing is not supported and any prefix length is ignored if specified. See Section 11.8, “Full-Text Search Functions”, for details of operation.

  • You can create SPATIAL indexes on spatial data types. Spatial types are supported only for MyISAM tables and indexed columns must be declared as NOT NULL. See Chapter 20, Spatial Extensions.

  • InnoDB tables support checking of foreign key constraints. See Section 13.2, “The InnoDB Storage Engine”. Note that the FOREIGN KEY syntax in InnoDB is more restrictive than the syntax presented for the CREATE TABLE statement at the beginning of this section: The columns of the referenced table must always be explicitly named. InnoDB supports both ON DELETE and ON UPDATE actions on foreign keys. For the precise syntax, see Section 13.2.6.4, “FOREIGN KEY Constraints”.

    For other storage engines, MySQL Server parses and ignores the FOREIGN KEY and REFERENCES syntax in CREATE TABLE statements. The CHECK clause is parsed but ignored by all storage engines. See Section 1.8.5.4, “Foreign Keys”.

    Important

    The inline REFERENCES specifications where the references are defined as part of the column specification are silently ignored by InnoDB. InnoDB only accepts REFERENCES clauses when specified as part of a separate FOREIGN KEY specification.

  • There is a hard limit of 4096 columns per table, but the effective maximum may be less for a given table and depends on the factors discussed in Section F.7.2, “The Maximum Number of Columns Per Table”.

The ENGINE table option specifies the storage engine for the table. TYPE is a synonym, but ENGINE is the preferred option name.

The ENGINE table option takes the storage engine names shown in the following table.

Storage Engine Description
ARCHIVE The archiving storage engine. See Section 13.8, “The ARCHIVE Storage Engine”.
BDB Transaction-safe tables with page locking. Also known as BerkeleyDB. See Section 13.5, “The BDB (BerkeleyDB) Storage Engine”.
CSV Tables that store rows in comma-separated values format. See Section 13.9, “The CSV Storage Engine”.
EXAMPLE An example engine. See Section 13.6, “The EXAMPLE Storage Engine”.
FEDERATED Storage engine that accesses remote tables. See Section 13.7, “The FEDERATED Storage Engine”.
HEAP This is a synonym for MEMORY.
ISAM (OBSOLETE) Not available in MySQL 5.0. If you are upgrading to MySQL 5.0 from a previous version, you should convert any existing ISAM tables to MyISAM before performing the upgrade.
InnoDB Transaction-safe tables with row locking and foreign keys. See Section 13.2, “The InnoDB Storage Engine”.
MEMORY The data for this storage engine is stored only in memory. See Section 13.4, “The MEMORY (HEAP) Storage Engine”.
MERGE A collection of MyISAM tables used as one table. Also known as MRG_MyISAM. See Section 13.3, “The MERGE Storage Engine”.
MyISAM The binary portable storage engine that is the default storage engine used by MySQL. See Section 13.1, “The MyISAM Storage Engine”.
NDBCLUSTER Clustered, fault-tolerant, memory-based tables. Also known as NDB. See Chapter 19, MySQL Cluster.

If a storage engine is specified that is not available, MySQL uses the default engine instead. Normally, this is MyISAM. For example, if a table definition includes the ENGINE=BDB option but the MySQL server does not support BDB tables, the table is created as a MyISAM table. This makes it possible to have a replication setup where you have transactional tables on the master but tables created on the slave are non-transactional (to get more speed). In MySQL 5.0, a warning occurs if the storage engine specification is not honored.

Engine substitution can be controlled by the setting of the NO_ENGINE_SUBSTITUTION SQL mode, as described in Section 5.1.7, “SQL Modes”.

The other table options are used to optimize the behavior of the table. In most cases, you do not have to specify any of them. These options apply to all storage engines unless otherwise indicated. Options that do not apply to a given storage engine may be accepted and remembered as part of the table definition. Such options then apply if you later use ALTER TABLE to convert the table to use a different storage engine.

  • AUTO_INCREMENT

    The initial AUTO_INCREMENT value for the table. In MySQL 5.0, this works for MyISAM and MEMORY tables. It is also supported for InnoDB as of MySQL 5.0.3. To set the first auto-increment value for engines that do not support the AUTO_INCREMENT table option, insert a “dummy” row with a value one less than the desired value after creating the table, and then delete the dummy row.

    For engines that support the AUTO_INCREMENT table option in CREATE TABLE statements, you can also use ALTER TABLE tbl_name AUTO_INCREMENT = N to reset the AUTO_INCREMENT value. The value cannot be set lower than the maximum value currently in the column.

  • AVG_ROW_LENGTH

    An approximation of the average row length for your table. You need to set this only for large tables with variable-size rows.

    When you create a MyISAM table, MySQL uses the product of the MAX_ROWS and AVG_ROW_LENGTH options to decide how big the resulting table is. If you don't specify either option, the maximum size for MyISAM data and index table files is 256TB of data by default (4GB before MySQL 5.0.6). (If your operating system does not support files that large, table sizes are constrained by the file size limit.) If you want to keep down the pointer sizes to make the index smaller and faster and you don't really need big files, you can decrease the default pointer size by setting the myisam_data_pointer_size system variable, which was added in MySQL 4.1.2. (See Section 5.1.3, “System Variables”.) If you want all your tables to be able to grow above the default limit and are willing to have your tables slightly slower and larger than necessary, you can increase the default pointer size by setting this variable. Setting the value to 7 allows table sizes up to 65,536TB.

  • [DEFAULT] CHARACTER SET

    Specify a default character set for the table. CHARSET is a synonym for CHARACTER SET. If the character set name is DEFAULT, the database character set is used.

  • CHECKSUM

    Set this to 1 if you want MySQL to maintain a live checksum for all rows (that is, a checksum that MySQL updates automatically as the table changes). This makes the table a little slower to update, but also makes it easier to find corrupted tables. The CHECKSUM TABLE statement reports the checksum. (MyISAM only.)

  • [DEFAULT] COLLATE

    Specify a default collation for the table.

  • COMMENT

    A comment for the table, up to 60 characters long.

  • CONNECTION

    The connection string for a FEDERATED table. This option is available as of MySQL 5.0.13; before that, use a COMMENT option for the connection string.

  • DATA DIRECTORY, INDEX DIRECTORY

    By using DATA DIRECTORY='directory' or INDEX DIRECTORY='directory' you can specify where the MyISAM storage engine should put a table's data file and index file. The directory must be the full pathname to the directory, not a relative path.

    These options work only when you are not using the --skip-symbolic-links option. Your operating system must also have a working, thread-safe realpath() call. See Section 7.6.1.2, “Using Symbolic Links for Tables on Unix”, for more complete information.

    If a MyISAM table is created with no DATA DIRECTORY option, the .MYD file is created in the database directory. By default, if MyISAM finds an existing .MYD file in this case, it overwrites it. The same applies to .MYI files for tables created with no INDEX DIRECTORY option. As of MySQL 5.0.48, to suppress this behavior, start the server with the --keep_files_on_create option, in which case MyISAM will not overwrite existing files and returns an error instead.

    If a MyISAM table is created with a DATA DIRECTORY or INDEX DIRECTORY option and an existing .MYD or .MYI file is found, MyISAM always returns an error. It will not overwrite a file in the specified directory.

    Important

    Beginning with MySQL 5.0.60, you cannot use pathnames that contain the MySQL data directory with DATA DIRECTORY or INDEX DIRECTORY. (See Bug#32167.)

  • DELAY_KEY_WRITE

    Set this to 1 if you want to delay key updates for the table until the table is closed. See the description of the delay_key_write system variable in Section 5.1.3, “System Variables”. (MyISAM only.)

  • INSERT_METHOD

    If you want to insert data into a MERGE table, you must specify with INSERT_METHOD the table into which the row should be inserted. INSERT_METHOD is an option useful for MERGE tables only. Use a value of FIRST or LAST to have inserts go to the first or last table, or a value of NO to prevent inserts. See Section 13.3, “The MERGE Storage Engine”.

  • MAX_ROWS

    The maximum number of rows you plan to store in the table. This is not a hard limit, but rather a hint to the storage engine that the table must be able to store at least this many rows.

  • MIN_ROWS

    The minimum number of rows you plan to store in the table.

  • PACK_KEYS

    PACK_KEYS takes effect only with MyISAM tables. Set this option to 1 if you want to have smaller indexes. This usually makes updates slower and reads faster. Setting the option to 0 disables all packing of keys. Setting it to DEFAULT tells the storage engine to pack only long CHAR, VARCHAR, BINARY, or VARBINARY columns.

    If you do not use PACK_KEYS, the default is to pack strings, but not numbers. If you use PACK_KEYS=1, numbers are packed as well.

    When packing binary number keys, MySQL uses prefix compression:

    • Every key needs one extra byte to indicate how many bytes of the previous key are the same for the next key.

    • The pointer to the row is stored in high-byte-first order directly after the key, to improve compression.

    This means that if you have many equal keys on two consecutive rows, all following “same” keys usually only take two bytes (including the pointer to the row). Compare this to the ordinary case where the following keys takes storage_size_for_key + pointer_size (where the pointer size is usually 4). Conversely, you get a significant benefit from prefix compression only if you have many numbers that are the same. If all keys are totally different, you use one byte more per key, if the key is not a key that can have NULL values. (In this case, the packed key length is stored in the same byte that is used to mark if a key is NULL.)

  • PASSWORD

    This option is unused. If you have a need to scramble your .frm files and make them unusable to any other MySQL server, please contact our sales department.

  • ROW_FORMAT

    Defines how the rows should be stored. For MyISAM tables, the option value can be FIXED or DYNAMIC for static or variable-length row format. myisampack sets the type to COMPRESSED. See Section 13.1.3, “MyISAM Table Storage Formats”.

    Starting with MySQL 5.0.3, for InnoDB tables, rows are stored in compact format (ROW_FORMAT=COMPACT) by default. The non-compact format used in older versions of MySQL can still be requested by specifying ROW_FORMAT=REDUNDANT.

    Note

    During CREATE TABLE, if you specify a row format that the engine does support, the table will be created using the storage engines default row format. The information reported in this column in response to SHOW TABLE STATUS is the actual row format used. This may differ from the value in the Create_options column because the original CREATE TABLE definition is retained during creation.

  • RAID_TYPE

    RAID support has been removed as of MySQL 5.0. For information on RAID, see /4.1/en/create-table.html.

  • UNION

    UNION is used when you want to access a collection of identical MyISAM tables as one. This works only with MERGE tables. See Section 13.3, “The MERGE Storage Engine”.

    You must have SELECT, UPDATE, and DELETE privileges for the tables you map to a MERGE table.

    Note

    Formerly, all tables used had to be in the same database as the MERGE table itself. This restriction no longer applies.

Important

The original CREATE TABLE statement, including all specifications and table options are stored by MySQL when the table is created. The information is retained so that if you change storage engines, collations or other settings using an ALTER TABLE statement, the original table options specified are retained. This allows you to change between InnoDB and MyISAM table types even though the row formats supported by the two engines are different.

Because the text of the original statement is retained, but due to the way that certain values and options may be silently reconfigured (such as the ROW_FORMAT), the active table definition (accessible through DESCRIBE or with SHOW TABLE STATUS and the table creation string (accessible through SHOW CREATE TABLE) will report different values.

You can create one table from another by adding a SELECT statement at the end of the CREATE TABLE statement: 

CREATE TABLE new_tbl SELECT * FROM orig_tbl;

MySQL creates new columns for all elements in the SELECT. For example: 

mysql> CREATE TABLE test (a INT NOT NULL AUTO_INCREMENT,
    ->        PRIMARY KEY (a), KEY(b))
    ->        ENGINE=MyISAM SELECT b,c FROM test2;

This creates a MyISAM table with three columns, a, b, and c. Notice that the columns from the SELECT statement are appended to the right side of the table, not overlapped onto it. Take the following example: 

mysql> SELECT * FROM foo;
+---+
| n |
+---+
| 1 |
+---+

mysql> CREATE TABLE bar (m INT) SELECT n FROM foo;
Query OK, 1 row affected (0.02 sec)
Records: 1  Duplicates: 0  Warnings: 0

mysql> SELECT * FROM bar;
+------+---+
| m    | n |
+------+---+
| NULL | 1 |
+------+---+
1 row in set (0.00 sec)

For each row in table foo, a row is inserted in bar with the values from foo and default values for the new columns.

In a table resulting from CREATE TABLE ... SELECT, columns named only in the CREATE TABLE part come first. Columns named in both parts or only in the SELECT part come after that. The data type of SELECT columns can be overridden by also specifying the column in the CREATE TABLE part.

If any errors occur while copying the data to the table, it is automatically dropped and not created.

CREATE TABLE ... SELECT does not automatically create any indexes for you. This is done intentionally to make the statement as flexible as possible. If you want to have indexes in the created table, you should specify these before the SELECT statement: 

mysql> CREATE TABLE bar (UNIQUE (n)) SELECT n FROM foo;

Some conversion of data types might occur. For example, the AUTO_INCREMENT attribute is not preserved, and VARCHAR columns can become CHAR columns. Retrained attributes are NULL (or NOT NULL) and, for those columns that have them, CHARACTER SET, COLLATION, COMMENT, and the DEFAULT clause.

When creating a table with CREATE ... SELECT, make sure to alias any function calls or expressions in the query. If you do not, the CREATE statement might fail or result in undesirable column names. 

CREATE TABLE artists_and_works
  SELECT artist.name, COUNT(work.artist_id) AS number_of_works
  FROM artist LEFT JOIN work ON artist.id = work.artist_id
  GROUP BY artist.id;

You can also explicitly specify the data type for a generated column: 

CREATE TABLE foo (a TINYINT NOT NULL) SELECT b+1 AS a FROM bar;

Use LIKE to create an empty table based on the definition of another table, including any column attributes and indexes defined in the original table: 

CREATE TABLE new_tbl LIKE orig_tbl;

The copy is created using the same version of the table storage format as the original table. The SELECT privilege is required on the original table.

CREATE TABLE ... LIKE does not preserve any DATA DIRECTORY or INDEX DIRECTORY table options that were specified for the original table, or any foreign key definitions.

You can precede the SELECT by IGNORE or REPLACE to indicate how to handle rows that duplicate unique key values. With IGNORE, new rows that duplicate an existing row on a unique key value are discarded. With REPLACE, new rows replace rows that have the same unique key value. If neither IGNORE nor REPLACE is specified, duplicate unique key values result in an error.

To ensure that the binary log can be used to re-create the original tables, MySQL does not allow concurrent inserts during CREATE TABLE ... SELECT.


User Comments

Posted by Erik Sliman on May 24 2004 8:48am[Delete] [Edit]

For 3.23.58 using InnoDB, I discovered that if you have a unique index key with multiple optional columns, then it does not apply a unique constraint at all if ANY of your data values for the columns are null. Thus, it will duplicate any data that has any nulls in any of the key columns.

If none of your column values are null, then it applies the unique constraint.

This was unexpected, because I remember Oracle applying the unique constraint on the remaining non-null values. It would be nice if MySQL could do this as well so we can guarantee that a unique key will not permit duplicates.

Posted by Martin Friebe on February 22 2005 6:04pm[Delete] [Edit]

just found a possibility to wotrk around the limitations of not reopening temp tables (works in 4.1.10 , but wouldnt bet on its future);

create temporary table tmp1 (...);

create temporary table tmp2 (...) enginme merge union (tmp1);

# this will only work is the merge table is temporary itself

add as many mrg tables as you need, use the merge tables instead of reopening the tmp (its still the same table :-) )

they are all temporary, so no clean up

Posted by Jeff Donner on August 11 2005 3:14am[Delete] [Edit]

If you want to the flexibility to drop or modify a foreign key (and, to change properties, you must drop & re-add the new version), you must create the foreign key with an otherwise optional 'symbol' name. You can verify this at the 'alter table syntax' page.

Posted by Ulrich Ulrich on May 25 2006 8:05am[Delete] [Edit]

I just found a work around for the limitation of not reopening temp tables (works in 4.1.10 , but wouldn't bet on it in the future);

create temporary table tmp1 (...);
create temporary table tmp2 (...) engine merge union (tmp1);

this will only work if the merge table is temporary itself
add as many merge tables as you need, use the merge tables instead of reopening the tmp (it's still the same table :-) )
they are all temporary, so no clean up necessary

Posted by Yahoo Serious on June 13 2006 9:36am[Delete] [Edit]

Note that if you specify a default character set for the table and no default collation, the default collation will be the one of the character set. This seems logical, until you have specified your own default collation.

Suppose you have specified a default character set for your database (or server or session), e.g. 'latin1', with a (deviating) default collation ('latin1_bin'). Now you create the table with default character set 'latin1', but no default collation. The default collation of the table will be the one of the character set ('latin1_swedish_ci'), and not the one you use as default collation ('latin1_bin').

Posted by Eugene Klimov on July 26 2007 11:50am[Delete] [Edit]

>A comment for the table, up to 60 characters long.
When using utf8 charset with multibyte characters then comment length reduce to 30 characters

Posted by Eric Rasmussen on November 12 2007 7:37pm[Delete] [Edit]

You may discover that you cannot use the LIKE option with a view.
> CREATE TEMPORARY TABLE tablename LIKE viewname
Error 134: 'databasename.tablename' is not BASE TABLE

However, this works:
> CREATE TEMPORARY TABLE tablename (SELECT * FROM viewname LIMIT 0)

Add your own comment.