--innodb

Enables the InnoDB storage engine, if the server was compiled with InnoDB support. Use --skip-innodb to disable InnoDB. The default value is 500.

--innodb_status_file

Controls whether InnoDB creates a file named innodb_status.<pid> in the MySQL data directory. If enabled, InnoDB periodically writes the output of SHOW ENGINE INNODB STATUS to this file.

By default, the file is not created. To create it, start mysqld with the --innodb_status_file=1 option. The file is deleted during normal shutdown.

This option is available as of MySQL 4.0.21.

innodb_additional_mem_pool_size

The size in bytes of a memory pool InnoDB uses to store data dictionary information and other internal data structures. The more tables you have in your application, the more memory you need to allocate here. If InnoDB runs out of memory in this pool, it starts to allocate memory from the operating system, and writes warning messages to the MySQL error log. The default value is 1MB.

innodb_autoextend_increment

The increment size (in MB) for extending the size of an auto-extending tablespace file when it becomes full. The default value is 8. This variable is available starting from MySQL 4.0.24 and 4.1.5. As of MySQL 4.0.24 and 4.1.6, it can be changed at runtime as a global system variable.

innodb_buffer_pool_awe_mem_mb

The size of the buffer pool (in MB), if it is placed in the AWE memory. If it is greater than 0, innodb_buffer_pool_size is the window in the 32-bit address space of mysqld where InnoDB maps that AWE memory. A good value for innodb_buffer_pool_size is 500MB. The maximum possible value for this variable is 63000.

To take advantage of AWE memory, you will need to recompile MySQL yourself. The current project settings needed for doing this can be found in the innobase/os/os0proc.c source file.

This variable is available as of MySQL 4.1.0. It is relevant only in 32-bit Windows. If your 32-bit Windows operating system supports more than 4GB memory, using so-called “Address Windowing Extensions,” you can allocate the InnoDB buffer pool into the AWE physical memory using this variable.

innodb_buffer_pool_size

The size in bytes of the memory buffer InnoDB uses to cache data and indexes of its tables. The default value is 8MB. The larger you set this value, the less disk I/O is needed to access data in tables. On a dedicated database server, you may set this to up to 80% of the machine physical memory size. However, do not set it too large because competition for physical memory might cause paging in the operating system.

innodb_data_file_path

The paths to individual data files and their sizes. The full directory path to each data file is formed by concatenating innodb_data_home_dir to each path specified here. The file sizes are specified in KB, MB, or GB (1024MB) by appending K, M, or G to the size value. The sum of the sizes of the files must be at least 10MB. If you do not specify On some operating systems, files must be less than 2GB. If you do not specify innodb_data_file_path, the default behavior starting from 4.0 is to create a single 10MB auto-extending data file named ibdata1. Starting from 3.23.44, you can set the file size larger than 4GB on those operating systems that support big files. You can also use raw disk partitions as data files. For detailed information on configuring InnoDB tablespace files, see Section 13.2.4, “InnoDB Configuration”.

innodb_data_home_dir

The common part of the directory path for all InnoDB data files. The default value is the MySQL data directory. If you specify the value as an empty string, in which case you can use absolute file paths in innodb_data_file_path.

innodb_fast_shutdown

The InnoDB shutdown mode. The default value is 1 as of MySQL 3.23.50, which causes a “fast” shutdown (the normal type of shutdown). If the value is 0, InnoDB does a full purge and an insert buffer merge before a shutdown. These operations can take minutes, or even hours in extreme cases. If the value is 1, InnoDB skips these operations at shutdown.

innodb_file_io_threads

The number of file I/O threads in InnoDB. Normally, this should be left at the default value of 4, but disk I/O on Windows may benefit from a larger number. On Unix, increasing the number has no effect; InnoDB always uses the default value. This variable is available as of MySQL 3.23.37.

innodb_file_per_table

If innodb_file_per_table is disabled (the default), InnoDB creates tables in the shared tablespace. If innodb_file_per_table is enabled, InnoDB creates each new table using its own .ibd file for storing data and indexes, rather than in the shared tablespace. See Section 13.2.4.1, “Using Per-Table Tablespaces”. This variable is available as of MySQL 4.1.1.

innodb_flush_log_at_trx_commit

If the value of innodb_flush_log_at_trx_commit is 0, the log buffer is written out to the log file once per second and the flush to disk operation is performed on the log file, but nothing is done at a transaction commit. When the value is 1, the log buffer is written out to the log file at each transaction commit and the flush to disk operation is performed on the log file. When the value is 2, the log buffer is written out to the file at each commit, but the flush to disk operation is not performed on it. However, the flushing on the log file takes place once per second also when the value is 2. Note that the once-per-second flushing is not 100% guaranteed to happen every second, due to process scheduling issues.

The default value of this variable is 1 (prior to MySQL 4.0.13, the default is 0).

A value of 1 is required for ACID compliance. You can achieve better performance by setting the value different from 1, but then you can lose at most one second worth of transactions in a crash. With a value of 0, any mysqld process crash can erase the last second of transactions. With a value of 2, then only an operating system crash or a power outage can erase the last second of transactions. However, InnoDB's crash recovery is not affected and thus crash recovery does work regardless of the value.

innodb_flush_method

If set to fdatasync (the default), InnoDB uses fsync() to flush both the data and log files. If set to O_DSYNC, InnoDB uses O_SYNC to open and flush the log files, and fsync() to flush the data files. If O_DIRECT is specified (available on some GNU/Linux versions starting from MySQL 4.0.14), InnoDB uses O_DIRECT to open the data files, and uses fsync() to flush both the data and log files. Note that starting from MySQL 3.23.41, InnoDB uses fsync() instead of fdatasync(), and it does not use O_DSYNC by default because there have been problems with it on many varieties of Unix. This variable is relevant only for Unix. On Windows, the flush method is always async_unbuffered and cannot be changed. This variable is available as of MySQL 3.23.40.

Different values of this variable can have a marked effect on InnoDB performance. For example, on some systems where InnoDB data and log files are located on a SAN, it has been found that setting innodb_flush_method to O_DIRECT can degrade performance of simple SELECT statements by a factor of three.

innodb_force_recovery

The crash recovery mode. Possible values are from 0 to 6. The meanings of these values are described in Section 13.2.8.1, “Forcing InnoDB Recovery”.

innodb_lock_wait_timeout

The timeout in seconds an InnoDB transaction may wait for a lock before being rolled back. The default is 50 seconds.

A lock wait for a MySQL table lock does not happen inside InnoDB, and this timeout does not apply to waits for table locks.

InnoDB does detect transaction deadlocks in its own lock table immediately and rolls back one transaction. The lock wait timeout value does not apply to such a wait.

innodb_locks_unsafe_for_binlog

Normally, InnoDB uses an algorithm called next-key locking. InnoDB performs row-level locking in such a way that when it searches or scans a table index, it sets shared or exclusive locks on the index records it encounters. Thus, the row-level locks are actually index record locks.

A next-key lock on an index record also affects the “gap” before that index record. That is, a next-key lock is an index record lock plus a gap lock. If a user has a shared or exclusive lock on record R in an index, another user cannot insert a new index record in the gap immediately before R in the index order.

The innodb_locks_unsafe_for_binlog variable controls next-key locking in InnoDB searches and index scans. By default, this variable is 0 (disabled), which means that next-key locking is enabled. To enable the variable (and disable next-key locking for searches and index scans), set it to 1.

The value of innodb_locks_unsafe_for_binlog does not affect the use of next-key locking for foreign-key constraint checking or duplicate-key checking. To affect those types of checking, set the FOREIGN_KEY_CHECKS and UNIQUE_CHECKS session variables (see Section 13.2.11, “InnoDB Performance Tuning Tips”).

Enabling innodb_locks_unsafe_for_binlog may cause phantom problems: Suppose that there is an index on the id column and that you want to read and lock all children from the child table with an identifier value larger than 100, with the intention of updating some column in the selected rows later:

SELECT * FROM child WHERE id > 100 FOR UPDATE;

The query scans the index starting from the first record where id is greater than 100. If the locks set on the index records do not lock out inserts made in the gaps, another client can insert a new row into the table. If you execute the same SELECT again within the same transaction, you see a new row in the result set returned by the query. This also means that if new items are added to the database, InnoDB does not guarantee serializability. Therefore, if this variable is enabled InnoDB guarantees at most isolation level READ COMMITTED. (Conflict serializability is still guaranteed.) This variable is available as of MySQL 4.1.4.

innodb_log_arch_dir

The directory where fully written log files would be archived if we used log archiving. The value of this variable should currently be set the same as innodb_log_group_home_dir. Starting from MySQL 4.0.6, there is no need to set this variable.

innodb_log_archive

Whether to log InnoDB archive files. This variable is unused. Recovery from a backup is done by MySQL using its own log files, so there is no need to archive InnoDB log files. The default for this variable is 0.

innodb_log_buffer_size

The size in bytes of the buffer that InnoDB uses to write to the log files on disk. The default value is 1MB. Sensible values range from 1MB to 8MB. A large log buffer allows large transactions to run without a need to write the log to disk before the transactions commit. Thus, if you have big transactions, making the log buffer larger saves disk I/O.

innodb_log_file_size

The size in bytes of each log file in a log group. The combined size of log files must be less than 4GB. The default value is 5MB. Sensible values range from 1MB to 1/N-th of the size of the buffer pool, where N is the number of log files in the group. The larger the value, the less checkpoint flush activity is needed in the buffer pool, saving disk I/O. But larger log files also mean that recovery is slower in case of a crash.

innodb_log_files_in_group

The number of log files in the log group. InnoDB writes to the files in a circular fashion. The default (and recommended) value is 2.

innodb_log_group_home_dir

The directory path to the InnoDB log files. It must have the same value as innodb_log_arch_dir. If you do not specify any InnoDB log variables, the default is to create two 5MB files names ib_logfile0 and ib_logfile1 in the MySQL data directory.

innodb_max_dirty_pages_pct

This is an integer in the range from 0 to 100. The default value is 90. The main thread in InnoDB tries to write pages from the buffer pool so that the percentage of dirty (not yet written) pages will not exceed this value. Available starting from 4.0.13 and 4.1.1.

innodb_max_purge_lag

This variable controls how to delay INSERT, UPDATE, and DELETE operations when the purge operations are lagging (see Section 13.2.12, “InnoDB Multi-Versioning”). The default value of this variable is 0, meaning that there are no delays. innodb_max_purge_lag is available as of MySQL 4.0.22 and 4.1.6.

The InnoDB transaction system maintains a list of transactions that have delete-marked index records by UPDATE or DELETE operations. Let the length of this list be purge_lag. When purge_lag exceeds innodb_max_purge_lag, each INSERT, UPDATE, and DELETE operation is delayed by ((purge_lag/innodb_max_purge_lag)×10)–5 milliseconds. The delay is computed in the beginning of a purge batch, every ten seconds. The operations are not delayed if purge cannot run because of an old consistent read view that could see the rows to be purged.

A typical setting for a problematic workload might be 1 million, assuming that transactions are small, only 100 bytes in size, and it is allowable to have 100MB of unpurged InnoDB table rows.

innodb_mirrored_log_groups

The number of identical copies of log groups to keep for the database. This should be set to 1.

innodb_open_files

This variable is relevant only if you use multiple tablespaces in InnoDB. It specifies the maximum number of .ibd files that InnoDB can keep open at one time. The minimum value is 10. The default value is 300. This variable is available as of MySQL 4.1.1.

The file descriptors used for .ibd files are for InnoDB only. They are independent of those specified by the --open-files-limit server option, and do not affect the operation of the table cache.

innodb_safe_binlog

Adds consistency guarantees between the content of InnoDB tables and the binary log. See Section 5.3.4, “The Binary Log”.

innodb_table_locks

Starting from MySQL 4.0.20, and 4.1.2, InnoDB honors LOCK TABLES. If AUTOCOMMIT=0, InnoDB honors LOCK TABLES; MySQL does not return from LOCK TABLES ... WRITE until all other threads have released all their locks to the table. The default value of innodb_table_locks is 1, which means that LOCK TABLES causes InnoDB to lock a table internally if AUTOCOMMIT=0.

innodb_thread_concurrency

InnoDB tries to keep the number of operating system threads concurrently inside InnoDB less than or equal to the limit given by this variable. The default value is 8. If you have low performance and SHOW INNODB STATUS reveals many threads waiting for semaphores, you may have thread thrashing and should try setting this variable lower or higher. If you have a computer with many processors and disks, you can try setting the value higher to better utilize the resources of your computer. A recommended value is the sum of the number of processors and disks your system has. A value of 500 or greater disables the concurrency checking. This variable is available starting from MySQL 3.23.44 and 4.0.1.

sync_binlog

If the value of this variable is greater than 0, the MySQL server synchronizes its binary log to disk (using fdatasync()) after every sync_binlog writes to the binary log. There is one write to the binary log per statement if autocommit is enabled, and one write per transaction otherwise. The default value of sync_binlog is 0, which does no synchronizing to disk. A value of 1 is the safest choice, because in the event of a crash you lose at most one statement or transaction from the binary log. However, it is also the slowest choice (unless the disk has a battery-backed cache, which makes synchronization very fast). This variable was added in MySQL 4.1.3.